ZALETAIPLANNER← Zaletai website

What to capture

Route

How to load the mission: phone (iPhone and Android)

For a controller without a screen (RC-N1, RC-N2, RC-N3): DJI Fly runs on your phone. The steps are the same; only the file location differs.

  1. Download the flight file and move it to your phone: AirDrop, Telegram “Saved Messages”, cloud or cable.
  2. In DJI Fly, using the same drone, create a Waypoints mission with any 1–2 points and save it. Each flight needs its own placeholder. Close DJI Fly completely.
  3. Find the missions folder (below) and open the most recent folder: it has a long name made of letters and digits, and inside is a .kmz file with the same name.
  4. Copy this folder’s name, paste it into the field under the flight on the site, then tap “Download .kmz”: the file will already have the right name. Put it in this folder, replacing the old one. (No field? Rename the downloaded file to exactly match the file in the folder and replace it.)
  5. Open DJI Fly, select the mission and check the route on the map. Take off from point H: altitudes are measured from the takeoff point.
iPhone
“Files” → “On My iPhone” → DJI Fly → wayline_mission
Android
Android/data/dji.go.v5/files/waypoint

On Android 11 and later, a regular file manager often cannot open the Android/data folder. It is easier to connect the phone to a computer with a cable (on a Mac, via the free OpenMTP app) and replace the file from the computer.

How to load the mission: DJI RC / RC 2 controller with a screen

If you fly with a controller that has its own screen (DJI RC, RC 2, RC Pro), DJI Fly runs on the controller itself, and the mission goes into its storage.

  1. On the controller, in DJI Fly, using the same drone, create a Waypoints mission with any 1–2 points and save it. One placeholder per flight.
  2. Turn off the drone and close DJI Fly on the controller. Connect the controller to your computer with a USB-C cable (the charging and data port). The controller must stay on.
  3. Open the controller’s storage: on Windows it shows up as a device in “File Explorer”; on a Mac, use OpenMTP or Android File Transfer.
  4. Go to Android/data/dji.go.v5/files/waypoint and open the most recent folder. Inside is a .kmz file with the same long name.
  5. Copy the folder name, paste it into the field under the flight on the site and download the .kmz — it will already have the right name. Put it in this folder, replacing the old one. Unplug the cable.
  6. Open DJI Fly on the controller, select the mission and check the route. Take off from point H.

Computer does not see the controller? Try another cable: you need a data cable, not a charge-only one.

Test your first mission on a small area. Check flight zones and local rules.

Your drone

Set up before you fly

Zaletai spots

Orange ones are already in the simulator, blue ones are waiting to be shot. Click a spot to fly there and plan a scan.